Corona Discharge Station FA-52 Series
Corona treatment is known as dielectric barrier discharge. It is mainly used for surface treatment of
plastic film or plastic sheet. Before ink printing, laminating, blowing, coating, gluing, material
modification, polymerization, film metallization, casting and adhesions of the materials, in order to
make the surface have stronger adhesion (i.e. higher dyne level), and prevent the printing and gluing
from fading, dropping and other poor effects, it is necessary to use corona surface treatment.
The principle of the corona is to use high-frequency and high-voltage to generate corona between the
discharge electrode and the corona roller to form a low-temperature plasma area. Through the air ion
ization between the two medium, ozone is produced. Ozone is an oxidant, which can immediately change
the molecular structure of the plastic surface and make it from non-polar to polar. At the same time,
the corona will make the surface of the material have small and uneven holes to rough the surface and
enhance the surface activity, after the surface tension is increased, so the ink, glue, etc. can deeply
penatrate into the material because of the treatment so it achieves the desired printing and gluing effects.