Static eliminator ion elimination is not clean or ineffective reasons? Static eliminator consists of high-voltage power producer and discharge electrode (usually made of ion needle), through the tip of the high-voltage halo discharge to ionize the air into a large number of positive and negative ions, and then a large number of positive and negative ions will be blown to the surface of the object to neutralize the static electricity, or to directly neutralize the static electricity. It is widely used ESDS (electrostatic discharge sensitive) equipment for electrostatic prevention and control. In daily use, electrostatic eliminators will inevitably have problems such as ions not cleaned or ion elimination failure. Today, let's look at the causes of these problems.

First, the power supply, gas source.

① power supply is not grounded or grounding is not fully guaranteed grounding. Transformer does not ensure good grounding, grounding knob is tightened.

② The gas source used is not effectively filtered, the filter is not cleaned in time. Particles of water, oil and dust/powder are caused to enter the ion generator chamber and adhere to the inner wall of the plastic parts.

Note: When water, oil, and dust/dust particles accumulate to a certain level, the ion needle catches fire. Plastic parts gradually form honeycomb-like scorch damage and the amount of ion exclusion gradually decreases; there will be a safety hazard.

Second, adjust the electrostatic eliminator static effect.

(1) in addition to the static effect and air pressure is inversely proportional. Air pressure should be 0.3Mpa-0.7Mpa.

② gun head, wind nozzle head and static field distance, angle affects the effect of static electricity, should pay attention to debugging until satisfied.

Third, the launch needle problem

① launch needle pollution

After applying high pressure on the firing pin, the small dust around the firing pin will be charged with the resulting ions. As a result of the discharge needle and charged dust between the existence of Coulomb force, the dust will adhere to the launch needle, resulting in launch needle contamination.

② Damage to the emitter pin

Static eliminators usually apply more than 4kV to the discharge needle (2-3kV for high frequency AC method) Therefore, the tip portion of the discharge needle carries a very large energy load. This is the main cause of wear and tear on the discharge needle. Contamination also increases corrosion and wear on the electrode needle.

Once the tip of the discharge needle wears out, the concentration of the electric field energy will inevitably decrease and therefore the ion generation will also decrease. The reduction in ion generation slows down the de-energization time. In addition, when the discharge needle wears out, it also has a significant effect on the occurrence of positive and negative ions. In other words, the reduction of positive ions is greater than that of negative ions, and therefore the occurrence of negative ions is greater than that of positive ions, resulting in a poorer electrostatic balance.

Hefeng Machinery Group focuses on the development and application of surface treatment industry for more than 20 years, corona machine, corona treatment machine, plasma machine, static generator, static eliminator, dust removal machine, UV curing, UV power supply, electronic UV, UV light box, plasma treatment system, vacuum plasma, spark machine, plasma treatment, flame treatment machine, electronic spark machine, EDM impact machine, surface treatment machine, polymer Surface Flowering Machine, UV lamp, UV transformer, and so on. It is a national high-tech enterprise integrating R&D, production and sales.

Our core competitiveness comes from the fact that we never stop launching new products and designing molds, and vigorously investing in the research and development of new products, it is this guiding principle that makes us different, which also enables us to become a real solution-oriented company in the industry. From the design of the solution to the final inspection of the equipment, we pay meticulous attention to every detail to ensure that the quality of our products and customer service meets the highest standards, and with our highly qualified service team and experienced technicians, we have gained an international reputation as a solid and reliable partner.

If you want to know more, you can contact online customer service!