How to wire the UV lamp

1, before installation, the lamp should be wiped clean with ethanol, and then wear clean gloves to hold the lamp.

2, the card holder to install the lamp hole with a cloth pad will be threaded into the lamp, do not let the lamp touch the surface of the metal end plate, so that the lamp in the cloth rubbed through. UV lamps with wiring direction must pay attention to the direction. Otherwise, it will lead to damage to the lamp, life expectancy is reduced or the surface of the lamp overheating phenomenon occurs.

3, the lamp is installed in place, hold the head of the lamp with your hand on the card base to swing a few times to see if the lamp is a free state, so that the installation of the lamp will not be installed when the expansion and cracking phenomenon.

4, sometimes check the lamp, the UV lamp will be removed to observe the lamp wall found on the wall of the handprint marks, and can not be wiped off. This is due to the installation of the lamp did not wear gloves, hand sweat and dirt stuck in the lamp by high temperature carbonization sintered on the quartz glass crystal. Serious leakage in the location of the stain to make the lamp scrapped.

5, installation or replacement of UV lamps, cleaning lamp shade must be turned off the power supply, otherwise it will be electrocuted.

Hefeng Machinery Group focuses on the development and application of surface treatment industry for more than 20 years, corona machine, corona treatment machine, plasma machine, static generator, static eliminator, dust removal machine, UV curing, UV power supply, electronic UV, UV light box, plasma treatment system, vacuum plasma, spark machine, plasma treatment, flame treatment machine, electronic spark machine, EDM impingement machine, surface treatment machine, polymer Surface Flowering Machine, UV lamp, UV transformer, and so on. It is a national high-tech enterprise integrating R&D, production and sales.

Our core competitiveness comes from the fact that we never stop launching new products and designing molds, and vigorously investing in the research and development of new products, it is this guiding principle that makes us different, which also enables us to become a real solution-oriented company in the industry. From the design of the solution to the final inspection of the equipment, we pay meticulous attention to every detail to ensure that the quality of our products and customer service meets the highest standards, and with our highly qualified service team and experienced technicians, we have an international reputation as a solid and reliable partner.

Anyone who wants to know more can contact online customer service!